Services you can trust on
We inspires our customers & support local businesses, Bimetal and metal bearings offer excellent corrosion resistance in industrial outdoor applications and in water, marine and offshore environments. manufacturing and selling of bearings bushings and thrust wahser.
Experienced
Get all the bimetallic Bearing material
Bimetal Bearings Solutions
Design according your application
24/7 Support
Bimetallic Bearing supplier
Plain Bearings, Self-lubricating Bimetal Bushings Manufacturer
Bimetal bearing is a kind of oil-free lubrication bearing, the product is based on high quality low carbon steel backing, surface sintering lead-tin bronze alloy, by several times high temperature sintering and dense rolling of copper, steel one of the bimetal strip rolled, suitable for bearing medium speed, high impact load bushings, thrust washers and other multi kinds of applications.
Bimetal bearing material
Because the substrate is stable for low carbon steel material, so the outer diameter of the bushing processing accuracy is guaranteed, and after the product is installed in the seat hole without screw fixing, relying on interference fit can prevent the phenomenon of going out of round. The change of chemical composition of the inner surface alloy layer can meet the requirements of different bearing pressure, different use temperature and different sliding speed, and the friction surface is designed with different structure of oil groove and oil cavity in the production can meet the requirements of different refueling methods and prevent the phenomenon of shaft gnawing.
Bimetal Bearings
Beautifully crafted leather products.
Bimetal bearings material designed for use where high wear resistance is required, even at low or high temperatures, and under heavy loads. The bimetal bearings maintains a relatively low coefficient of friction compared to similar materials. The self-lubricating sliding layer is a peculiar mixture of sintered bronze and a special solid lubricant.
The Bimetal bearings backing materials used for this bushing are carbon steel and sintered bronze. We can produce any size for any type of special plain bearing bushing, flange bimetal bearing, thrust washer or sliding plate and custom size from drawings.
Normally, this steel backed sintered bronze bushing material does not require any lubrication, but hydrodynamic lubrication can also be used. Bimetal Bushing Bearing Dimensions For further information on the dimensions we can produce!
Carbon Steel Sintering bronze Special Treatment
Professional Bimetal Bearings Manufacturer
Bimetal bearing performance
The product has advantages such as good wear resistance. It is especially suitable for medium speed medium load and low speed high load etc. Through special technology, various oil grooves, oil cavities and oil holes can be processed on the friction surface, so as to adapt to the use of different lubrication conditions. The products have been widely used in automobile engines, chassis, motorcycle clutches, gear pumps and lifting equipment and other fields.
Bimetal Bearings Technical Specifications
Â
| Â | Bimetal Bearing |
|---|---|
| Product Category | Plain Bearings and Sleeve Bearings |
| Product Number | Bimetal Bushing |
| Product Name | Bimetal Bearing with Steel Backing and Leaded Bronze Overlay |
| Tensile Strength | 20305 to 43511 psi (14290 to 30622 m H2O) |
| Design Units | Metric |
| Operating Temperature | -40 to 482 F (-40 to 250 C) |
| Bushing Type | Sleeve |
| Bearing Surface | Leaded Bronze (Lined Bearing Surface) |
| Body | Steel |
Bimetal Bearing ApplicationsÂ
Data SheetÂ
Characteristics – Bimetallic bearings with steel backing and bronze covering – Particularly suitable for high specific loads with oscillating movements and low frequencies
– Suitable for rough operating conditions
– High load capacity, very good fatigue strength at higher temperatures
Availability of bimetallic plain bearings according to standard SEA 792
Bearing forms available in standard sizes Cylindrical bushings, thrust washers Bearing forms made to order Cylindrical bushings and thrust washers with non-standard dimensions, sliding plates, custom bearing designs
Bimetal Bearing Material
composition approx.:
Cu 80 %
Pb 10 %
Sn 10 %
Solid Bronze Bearing
Solid self-lubricating bearing
Metal-based inlay solid self-lubricating bearing (JDB for short) is a kind of novel lubricating bearing which has the characteristics of both metal bearing and self-lubricating bearing, the load is borne by the metal matrix, and the special formula of solid lubricating material plays the role of lubrication. It has high bearing capacity, impact resistance, high temperature resistance, self-lubricating ability and other characteristics, especially for heavy load, low speed, reciprocating or oscillating and other difficult to lubricate and form the oil film occasion, also not afraid of water and other acid corrosion and scouring.
Bimetallic Bearing Bushing , Made in china
Bimetal Bearing Structure , Deliver & Support
Expensive price, Bimetallic Bearing Suppliers, Plain Bearings and Sleeve Bearings from China completed reliably from start to finish. Bimetallic Bearing Type.
Bimetal Bearing Structure with Steel Backing and Leaded Bronze Overlay
BIMETAL BEARINGS CHARACTERISTICS
Particularly suitable for high specific loads with oscillating motion and low frequency Applicable in rough operation conditions High load capacity, very good resistance to fatigue strength at higher temperatures
- Cylindrical Bushes, Plain Bearings and Sleeve Bearings
- Flange bimetal bearings
- Thrust washers
about the company
Metal & Bimetal Bearing- Bronze Bushing- Steel Bush
Bi-metal Journal bearings: Materials and construction, Discover our range of metal, bimetal, steel & sintered bronze bearings & bushings for lubricated conditions:
Energy Generation
Product Quality Index
Product Quality Index
Energy Generation
Bimetallic bearing steel material
The bimetallic bearing is a new type of lubricated bearing that combines the advantages of a metallic bearing and a self-lubricating bearing. The weight is supported by a metal base and lubricated using a specially developed solid lubricant. It has a high load-bearing capacity The matrix is stable to the low carbon steel material, so the outer diameter of the shaft sleeve processing accuracy is guaranteed, and after the product into the seat hole does not need to screw fixation, depending on interference fit can prevent the phenomenon of going round. The change of chemical composition of inner surface alloy layer can meet the requirements of different bearing pressure, different service temperature and different sliding speed. Oil groove and oil hole with different structure can meet the requirements of different refueling methods and prevent the phenomenon of biting shaft.
